universal ic programmer kit|flash ic programmer|Automated Device Programmers-System General

Acroview Technology, the leader of the chip programming industry, recently released the latest programming software update and the list of newly supported chip models. Among them, Acroview released the software update to support the programming of the multi-channel PMIC device MPF5020AMMA0ES of NXP NXP Semiconductor, which has been supported by Onco's universal burning platform AP8000.

MPF5020AMMA0ES is a multi-channel PMIC device of Enzhipu, which is suitable for high-performance automotive and industrial applications. The MPF5020AMMA0ES is highly configurable and can be used as an excellent supporting equipment for various system-level power requirements.

The independent built-in voltage monitoring circuit ensures compliance with ISO26262 standard, and the functional safety can reach ASIL B level at most. MPF5020AMMA0ES can also be used as standard non-safety equipment, and is applicable to applications that do not need to comply with ISO.

MPF5020AMMA0ES is applicable to various applications, including on-board infotainment system, ADAS, vision and radar. It can be used as an independent power supply solution, and can also be combined with other NXP PMICs of SBC such as PF8200 or FS8500.

This device is suitable for applications based on i.MX and S32 processors.

Main characteristics

• 3 efficient step-down converters

• 1 linear regulator with load switch option

• RTC power supply and button battery charger

• VTT termination of storage rail

• 40-pin 6x6 QFN package

System characteristics

• OTP (one time programming) memory for flexible device configuration

• High-speed I2C interface (3.4MHz)

• Independent ENABLE control and PGOOD monitoring circuit

• External clock synchronization

• Spread spectrum

Monitor the circuit to achieve ASIL B safety level

• Independent circuit according to ASIL B safety class

• Voltage monitoring with programmable fault protection

• Advanced thermal monitoring and protection

• External watchdog monitoring and programmable internal watchdog counter

• I2C CRC and write protection mechanism

• Analog built-in self-test (ABIST)

Internal block diagram

The AP8000 multipurpose programmer independently developed by Acroview programmer consists of three parts: host, base plate and adapter seat.

The host supports USB and NET connections, and allows multiple general-purpose programmers to be networked to control multiple IC programming devices to burn at the same time. The built-in chip safety protection circuit ensures that even if the chip is reversed or the short circuit caused by other reasons can be detected immediately and power off to ensure the safety of the chip and programmer. Embedded high-speed FPGA greatly accelerates data transmission and processing. There is an SD card slot on the back of the host computer. Put the project files produced by PC software into the root directory of the SD card and insert them into the slot. You can select, load, and execute the commands such as burning the project files by pressing the keys on the programmer to achieve the purpose of operating without the PC, greatly reducing the cost of PC hardware configuration, and quickly and conveniently matching the working environment.

The AP8000 makes the host more scalable by adding an adapter board to the backplane. At present, it has supported all devices produced by mainstream semiconductor manufacturers, including TI, ST, MicroChip, Atmel, Hynix, Macronix, Micron, Samsung, Toshiba, etc. Supported device types include NAND, NOR, MCU, CPLD, FPGA, EMMC, and other file formats including Intel Hex, Motorola S, Binary, POF, etc.

Company Profile

About NXP Semiconductor: NXP Semiconductor (NXP) was founded in 2006. Its predecessor was the semiconductor business unit established by Philips in 1953, with its headquarters in Eindhoven, the Netherlands. NXP was listed on NASDAQ in 2010. In 2015, NXP acquired Freescale Semiconductor, founded by Motorola, and became the world's top ten non-storage semiconductor companies, as well as the world's largest automotive semiconductor supplier (Strategy Analytics). With offices in 30 countries and regions around the world, the total number of employees exceeded 30000, and the global revenue in 2019 was 8.877 billion dollars.

About Acroview Technology: ACROVIEW is Global Leader of semiconductor Automatic Programming solutions. The company insists on changing the world with technology, driving the future with intelligence, and continuously creating value for customers. Acroview's AP8000 universal programmer platform and the latest IPS5000 burner automation solution provide one-stop solutions for customers in the semiconductor and electronic manufacturing fields. The company has served such global leading customers as Huawei, BYD and Foxconn.