universal ic programmer kit|flash ic programmer|Automated Device Programmers-System General

Acroview, a leader in chip programming, has officially announced an expansion of its compatible chip coverage alongside the release of a new version of its programming software. The company's core product — the universal programming platform AP8000 — has now been fully adapted for AdvanceChip's digital signal processor AVP32F069QP100.

The AVP32F069QP100 is a high-performance floating-point processor with a main frequency of up to 90MHz. It features a Control Law Accelerator (CLA) that is fully programmable in C, supports complex mathematical instructions and direct memory access, reducing CPU interrupt overhead. Multiple internal linear voltage regulators enable single-supply operation. The HRPWM module has been enhanced to provide dual-edge control (frequency modulation). It offers up to 256KB of Flash and 100KB of RAM, as well as various communication interfaces including USB.

Product Features

• High-performance 32-bit floating-point processor core

-- 90MHz main frequency (11.11ns single cycle)

-- Supports 16×16 and 32×32 Multiply-Accumulate (MAC) operations

-- Supports 16×16 dual MAC operations

-- Supports single-precision floating-point (FPU) operations

-- Harvard bus architecture

-- Atomic operations

-- Fast interrupt response and processing

-- Unified memory programming model

-- Code (using C/C++ and assembly)

• Programmable Control Law Accelerator (CLA)

-- 32-bit floating-point math accelerator

-- Code execution independent of the main CPU

• Viterbi, Complex Math, CRC Unit (VCU)

-- Supports complex multiplication, Viterbi operations, and Cyclic Redundancy Check (CRC) via extended instruction set

• Embedded memory

-- Up to 256KB Flash

-- Up to 100KB RAM

-- 2KB One-Time Programmable (OTP) ROM

• Low device and system cost

-- 3.3V single supply, no power sequencing required

-- Integrated power-on reset and brown-out reset monitoring

-- Low-power operating modes

-- No analog support pins

• Endianness: Little-endian

• JTAG boundary scan support

-- IEEE Standard 1149.1-1990 Standard Test Access Port and Boundary Scan Architecture

• Clocks

-- Two internal zero-pin oscillators

-- On-chip crystal oscillator / external clock input

-- Watchdog timer module

-- Missing clock detection circuit

• Peripheral Interrupt Expansion (PIE) module supporting all peripheral interrupts

• Three 32-bit CPU timers

• Advanced control peripherals

• 8 enhanced Pulse Width Modulator (ePWM) modules

-- Total of 16 PWM channels (supports up to 8 HRPWMs)

-- Independent 16-bit timer in each module

• 3 enhanced Capture (eCAP) modules

• Up to 4 High-Resolution Capture (HRCAP) modules

• Up to 2 enhanced Quadrature Encoder Pulse (eQEP) modules

• 12-bit Analog-to-Digital Converter (ADC) with dual Sample-and-Hold (S/H)

-- Up to 3.46MSPS

-- Up to 16 channels

• On-chip temperature sensor

• 128-bit security key and lock

-- Protects secure memory blocks

-- Prevents firmware reverse engineering

• Serial port peripherals

-- Two Serial Communication Interface (SCI) modules

-- Two Serial Peripheral Interface (SPI) modules

-- One Inter-Integrated Circuit (I2C) bus

-- One Multichannel Buffered Serial Port (McBSP)

-- One enhanced Controller Area Network (eCAN)

-- Universal Serial Bus USB 2.0 specification

• Full-speed device mode

• Full-speed / low-speed host mode

• Up to 54 independent programmable, multiplexed General-Purpose Input/Output (GPIO) pins with input filtering

• Emulation features

-- Analysis and breakpoint functions

-- Real-time debugging via hardware

• Package options

-- 100-pin QP Thin Quad Flat Package (LQFP)

-- 80-pin QP Thin Quad Flat Package (LQFP)

• Temperature options

-- S: -40°C to 125°C

-- S1: -55°C to 125°C (screened)

-- Q: -40°C to 125°C (AEC-Q100 qualified)

Applications

• Air conditioner outdoor units

• Elevator door automatic open/close drive control

• Inverters and motor control

• On-board chargers (OBC) and wireless chargers

• Automatic sorting equipment

• CNC control

• Textile machinery

• Welding machines

• EV charging station power modules

• Vehicle wireless charging modules

• Energy storage power conversion systems (PCS)

• Central inverters

• Microinverters

• Solar power optimizers

• String inverters

• AC drive control modules

• AC drive power stage modules

• Linear motor power stages

• Servo drive control modules

• Servo drive power stage modules

• AC input BLDC motor drives

• DC input BLDC motor drives

• Industrial AC/DC converters

• Three-phase UPS

Functional Block Diagram

The AP8000 universal programmer, independently developed by Acroview, has become a benchmark professional programming solution in the industry. The device supports flexible one-to-one and one-to-eight configuration modes, offers both online and offline operation, and features dedicated programming solutions for memory chips such as eMMC and UFS. It fully covers bare-chip offline programming and on-board programming for the entire range of AdvanceChip devices. The AP8000 adopts an innovative modular design consisting of three core modules: mainframe, baseboard, and adapter, giving the device excellent compatibility and scalability. As a universal programming platform, it not only adapts to various programmable chips on the market but also, with stable and efficient performance, serves as the core component of Acroview's automated batch programming system IPS5800S, efficiently handling large-scale chip programming tasks to meet mass production requirements.

The AP8000 mainframe offers flexible connectivity with both USB and NET interfaces, enabling convenient networking of multiple programmers. Through networking, users can easily achieve synchronized control of multiple programmers and efficiently carry out parallel programming operations. In terms of safety, the mainframe features an intelligent safety protection circuit that monitors chip placement and circuit connections in real time. If abnormalities such as reverse insertion or short circuits are detected, it immediately triggers a power-off protection mechanism, ensuring the safe operation of both the chip and the programmer. The mainframe is equipped with a high-speed FPGA chip, greatly improving data transmission and processing efficiency, ensuring a smooth and efficient programming process. For enhanced convenience, an SD card slot is provided on the back of the mainframe. Users can store project files generated on a PC to an SD card, insert it into the slot, and then complete file selection, loading, and programming using the programmer's physical buttons, enabling PC‑independent operation. This design not only reduces dependency on computer hardware configuration but also simplifies the workspace setup, significantly improving operational flexibility.

In terms of scalability and compatibility, the AP8000 uses a modular combination of baseboard and adapter boards, effectively expanding the mainframe's capabilities. Currently, the device supports products from all major semiconductor manufacturers, including SK hynix, Micron, SANDISK, ASR, Kingston, and more. Its supported device types are extensive, including NAND, NOR, MCU, CPLD, FPGA, eMMC, etc., and it is fully compatible with various industry-standard file formats such as Intel Hex, Motorola S, Binary, and POF, providing users with a one-stop, full-scenario chip programming solution.

Company Introduction

About AdvanceChip: AdvanceChip was founded in October 2012 and is an integrated circuit design enterprise specializing in digital signal processor (DSP) chips and embedded solutions. AdvanceChip has successfully launched three major series of DSP chips (16-bit fixed-point, 32-bit fixed-point, 32-bit floating-point) as well as single-core/multi-core SoC products, widely used in new energy vehicles, intelligent industrial control, consumer electronics, and other fields.

About Acroview: Acroview is a national-level "Little Giant" enterprise specializing in the R&D, production, and sales of semiconductor chip testing and programming equipment. The company is committed to empowering the entire industry chain, including fabless companies, IDMs, OSATs, wafer fabs, and end-equipment manufacturers, through innovative semiconductor testing technologies and solutions. Acroview's pioneering Automated Burn-In (ABI) system greatly improves customer chip burn-in efficiency and reduces per-DUT testing costs. The company also provides equipment and solutions for PSV, CP, FT, ABI, SLT, and programming stages. Acroview perfectly integrates its leading product technology, system-level expertise, and globally distributed R&D and sales service networks to create value for customers in gaining a competitive edge in the market.