universal ic programmer kit|flash ic programmer|Automated Device Programmers-System General

Acroview, a leader in chip programming, has officially expanded its compatible chip model coverage with the release of its latest programming software. The company's core product, the universal programming platform AP8000, has now achieved full adaptation for XHSC's 32-bit microcontroller HC32A448MCT.

The HC32A448MCT is an automotive-grade 32-bit ARM Cortex-M4 MCU from XHSC, integrating FPU and MPU with a main frequency of 200MHz. Designed for automotive electronics and industrial control, it features high computing power, rich peripherals, and hardware security features.

Product Features

• ARMv7-M architecture 32-bit Cortex-M4 CPU, integrating FPU, MPU, DSP with SIMD instructions, and CoreSight standard debug unit. Maximum operating frequency 200MHz, achieving 250DMIPS or 680Coremarks computing performance

• Built-in memory

-- Up to 256KB Flash memory

-- Up to 68KB single-cycle access high-speed SRAM

• Power, clock, reset management

-- System power supply (VCC): 1.8-3.6V

-- 7 independent clock sources: external main crystal oscillator (4-25MHz); external sub-crystal oscillator (32.768kHz); internal high-speed RC (16/20MHz); internal medium-speed RC (8MHz); internal low-speed RC (32kHz); PLL; internal WDT dedicated RC (10kHz)

-- 15 reset sources: including power-on reset (POR), low-voltage detection reset (PVD1R/PVD2R), port reset (NRST), etc. Each reset source has an independent flag bit

• Low power operation

-- Peripheral functions can be independently turned off or on

-- Three low-power modes: Sleep mode, Stop mode, Power down mode

• Peripheral operation support system significantly reduces CPU load

-- 12-channel dual-host DMAC

-- 4 data computing units (DCU)

-- Supports peripheral event mutual triggering (AOS)

• High-performance analog

-- 3 independent 12-bit 2.5Msps ADCs

-- 2 independent 12-bit DACs

-- 4 independent voltage comparators (CMP)

• Timer

-- 2 multifunctional 16-bit PWM Timers (Timer6)

-- 3 16-bit motor PWM Timers (Timer4)

-- 1 32-bit general-purpose Timer (TimerA)

-- 4 16-bit general-purpose Timers (TimerA)

-- 2 16-bit basic Timers (Timer0)

-- Real-time clock Timer (RTC)

-- 2 WDTs, supporting internal dedicated clock

• Up to 67 GPIOs

-- Up to 62 5V-tolerant IOs

• Up to 14 communication interfaces

-- 6 USARTs, supporting ISO7816-3 protocol

-- 3 SPIs

-- 2 I2Cs, supporting SMBus protocol

-- 1 QSPI, supporting 100Mbps high-speed access (XIP)

-- 2 CAN FD controllers (MCAN), compatible with CAN2.0A/B

• External memory controller EXMC

-- Supports static memory controller

-- Supports LCD parallel interface, compatible with 8080/6800 mode

• Data encryption functions

-- AES/HASH(SHA256)/TRNG

• Package forms: LQFP80/64/48

Functional Block Diagram

The AP8000 universal programmer independently developed by Acroview has become a benchmark professional programming solution in the industry. The device supports flexible one-to-one and one-to-eight configuration modes, and provides online and offline dual working modes. It has developed dedicated programming solutions for storage chips such as eMMC and UFS, and can fully cover the offline programming (bare chip) and on-board programming needs of all XHSC chip series. The AP8000 adopts an innovative modular design of three core modules: main unit, baseboard, and adapter, giving the device excellent compatibility and expandability. As a universal programming platform, it can not only adapt to various programmable chips on the market, but also, with its stable and efficient performance, become the core component of Acroview's automated batch programming equipment IPS5800S, efficiently handling large-scale chip programming tasks to meet mass production requirements.

The AP8000 main unit features flexible connectivity, equipped with both USB and NET interfaces, enabling convenient networking of multiple programmers. Through the networking function, users can easily achieve synchronized control of multiple programmers and efficiently carry out parallel programming operations. In terms of safety, the main unit has a built-in intelligent safety protection circuit that can monitor the chip placement status and circuit connection in real time. Once abnormalities such as chip reverse insertion or short circuit are detected, it will immediately trigger the power-off protection mechanism, comprehensively safeguarding the safe operation of chips and the programmer. The main unit is equipped with a high-speed FPGA chip, greatly improving data transmission and processing efficiency, ensuring a smooth and efficient programming process. To enhance user convenience, an SD card slot is provided on the back of the main unit. Users can store engineering files generated on a PC to an SD card, insert the card into the slot, and then complete file selection, loading, and programming operations through the programmer's physical buttons, achieving independent operation without a PC. This design not only reduces dependence on computer hardware configuration but also simplifies the working environment setup process, significantly improving operational flexibility.

In terms of expandability and compatibility, the AP8000 uses a modular combination design of baseboard and adapter board, effectively expanding the functional boundaries of the main unit. Currently, the device supports products from all major semiconductor manufacturers, covering well-known brands such as SK hynix, Micron, SANDISK, ASR, Kingston, etc. Its supported device types are extensive, including NAND, NOR, MCU, CPLD, FPGA, EMMC, etc., and it is fully compatible with various industry-standard file formats such as Intel Hex, Motorola S, Binary, POF, providing users with a one-stop, full-scenario chip programming solution.

Company Introduction

About XHSC: XHSC is a core subsidiary of Huada Semiconductor Co., Ltd., the integrated circuit business platform under China Electronics Corporation (CEC). XHSC was formerly the MCU business unit of Huada Semiconductor. XHSC focuses on home appliances, industry, automotive, IoT, and other fields, specializing in the design of core intelligent control chips, providing customers with four major product lines: general control, motor control, automotive electronics, and ultra-low power consumption, as well as a complete set of system-level solutions including corresponding algorithms and software.

About Acroview: Acroview is a national-level "Little Giant" enterprise specializing in R&D, production, and sales of semiconductor chip testing and programming equipment. The company is committed to empowering the entire industrial chain, including Fabless, IDM, OSAT, wafer fabs, and end-equipment manufacturers, through innovative semiconductor testing technologies and solutions. Acroview's pioneering Auto Burn-In (ABI) system greatly improves customers' chip aging test efficiency and reduces test cost per DUT. It also provides equipment products and solutions for various stages including PSV, CP, FT, ABI, SLT, and programming. The company perfectly integrates leading product technology advantages, system-level expertise, and a globally deployed R&D and sales service network to create value for customers to gain a competitive edge in the market.