universal ic programmer kit|flash ic programmer|Automated Device Programmers-System General

Acroview, a leader in chip programming, has officially announced the expansion of its compatible chip portfolio with the latest software release. The company's flagship product – the universal programming platform AP8000 – has now achieved full adaptation with Nuvoton's 8-bit microcontroller CM1003BF2AE.

The CM1003BF2AE is a 1T 8051-core microcontroller with embedded flash, operating at frequencies up to 24 MHz. It features up to 32 KB of embedded flash, 1.25 KB of internal RAM, and 4 KB of LDROM (boot code area). The operating voltage ranges from 2.4V to 5.5V, and it meets industrial-grade temperature requirements from -40℃ to +105℃.

The CM1003BF2AE is equipped with four 16-bit timers, one 12-bit ADC with 8 input channels, one PWM with 6 output channels (each channel supports independent duty cycle setting), two high-speed UARTs up to 1 Mbps, one SPI, and one I²C. It is suitable for various industrial control and consumer applications requiring high reliability.

The CM1003BF2AE is available in two package types: TSSOP20 and QFN20.

Key Features

• CPU

-- Full-static 8-bit 1T 8051-core microcontroller

-- Instruction set fully compatible with MCS-51

-- 4-level priority interrupt configuration

• Operating Conditions

-- Operating voltage range: 2.4V to 5.5V

-- Maximum operating frequency: 24 MHz

-- Industrial temperature range: -40℃ to +105℃

• Memory

-- 16 KB APROM for user program code

-- Configurable 4K/3K/2K/1K/0K byte LDROM (boot code area)

-- Flash endurance: 100,000 cycles typical

-- Built-in ICP/ISP/IAP programming functions

-- 256-byte direct internal RAM

-- Up to 1 KB indirect internal RAM (XRAM) accessible via MOVX instruction

• Clock Sources

-- Internal high-speed oscillator configurable to 16 MHz or 24 MHz, with ±1% accuracy at 3.3V and ±3% over full temperature range

-- 10 kHz low-speed internal oscillator with ±10% factory accuracy

-- Supports external clock input

• Power Management

-- Supports two power-saving modes: Idle mode and Power-down mode

-- Typical power-down current: 8 μA

• Timers

-- Two 16-bit timers/counters 0 and 1, compatible with standard 8051

-- One PWM with 6 output channels, 16-bit resolution, independent duty cycle per channel, with Fault Brake function

-- One Wake-up Timer (WKT) for autonomous wake-up in low-power modes

-- One Watchdog Timer (WDT) clocked by internal 10 kHz independent clock

• Communication Interfaces

-- Two full-duplex UARTs with frame error detection and automatic address recognition; TXD/RXD pins of UART0 are software-configurable

-- One SPI bus, master/slave mode with transfer rate up to 12 Mbps

-- One I²C bus, master/slave mode with transfer rate up to 400 kbps

• Analog

-- One 12-bit ADC with 8 input channels, maximum sampling rate 500 ksps

• Up to 18 GPIOs with external interrupt support

-- Output pins support independent two-level slew rate control

-- Supports up to 20 mA sink/source current

-- Built-in configurable pull-up and pull-down resistors

• 96-bit Unique Identifier (UID)

• 128-bit Unique Customer Identifier (UCID)

• Development Tools

-- On-chip debugging via KEIL and IAR development environments

-- In-circuit programming (ICP)

-- In-system programming (ISP)

Applications

• Home appliances

• LED lighting control

• Motor control

• Industrial control

Internal Block Diagram

The AP8000 universal programmer independently developed by Acroview has become a benchmark professional programming solution in the industry. The system supports flexible one-to-one and one-to-eight configuration modes, provides both online and offline operation, and features dedicated programming solutions for memory chips such as eMMC and UFS. It fully covers the bare-chip offline programming and on-board programming needs for Nuvoton's entire chip series. The AP8000 adopts an innovative modular design with three core modules – main unit, baseboard, and adapter – endowing the device with outstanding compatibility and expandability. As a universal programming platform, it not only adapts to various programmable chips on the market but also serves as a core component of Acroview's automated batch programming system IPS5800S, delivering stable and high-efficiency performance to handle large-scale chip programming tasks and meet mass production requirements.

The AP8000 main unit features flexible connectivity with both USB and NET interfaces, enabling convenient networking of multiple programmers. Through networking, users can easily achieve synchronized control of multiple programmers for efficient parallel programming operations. In terms of security, the main unit incorporates an intelligent safety protection circuit that monitors chip placement and connection status in real time. Upon detecting abnormal conditions such as reverse insertion or short circuits, it immediately triggers power-off protection to safeguard both the chip and the programmer. The main unit is powered by a high-speed FPGA chip, significantly improving data transfer and processing efficiency for a smooth and efficient programming process. For enhanced convenience, an SD card slot is provided on the rear panel. Users can store project files generated on a PC to an SD card, insert it into the slot, and then use the physical buttons on the programmer to select, load, and execute programming operations, enabling stand-alone operation without a PC. This design not only reduces dependency on computer hardware but also simplifies workspace setup and greatly improves operational flexibility.

In terms of expandability and compatibility, the AP8000 adopts a modular combination of baseboard and adapter boards, effectively extending the main unit's capabilities. Currently, the device supports products from all major semiconductor manufacturers, covering brands such as SK hynix, Micron, SANDISK, ASR, and Kingston. Its supported device types are extensive, including NAND, NOR, MCU, CPLD, FPGA, EMMC, and more, and it is fully compatible with multiple industry-standard file formats such as Intel Hex, Motorola S, Binary, and POF, providing users with a one-stop, full-scenario chip programming solution.

Company Profiles

About Nuvoton: Nuvoton Technology was established in 2008 and officially commenced operations in July of the same year after taking over the logic IC business of Winbond Electronics. It was listed on the Taiwan Stock Exchange in 2010. Nuvoton focuses on the development of microcontrollers/microprocessors, smart home and cloud security related ICs, battery monitoring ICs, image sensing ICs, IoT application ICs, and semiconductor discrete components. Its products hold leading positions in industrial, automotive, communications, consumer electronics, and computer markets. In addition, Nuvoton operates a 6-inch wafer fab with diverse process technologies, offering professional wafer foundry services.

About Acroview: Acroview is a national-level "Little Giant" enterprise specialized in the R&D, manufacturing, and sales of semiconductor chip testing and programming equipment. The company is dedicated to empowering the entire industry chain – including Fabless, IDM, OSAT, wafer fabs, and end-device manufacturers – through innovative semiconductor testing technologies and solutions. Acroview's pioneering Automated Burn-In (ABI) system greatly improves chip burn-in testing efficiency and reduces per-DUT testing costs. The company also provides equipment and solutions across various stages including PSV, CP, FT, ABI, SLT, and programming. By seamlessly integrating leading product technology, system-level expertise, and a globally distributed R&D and sales service network, Acroview creates value for customers to achieve competitive advantages in the market.