universal ic programmer kit|flash ic programmer|Automated Device Programmers-System General

Acroview, a leader in chip programming, has officially announced the further expansion of its compatible chip coverage with the release of its latest programming software. The company's core product, the universal programming platform AP8000, has now achieved full adaptation with MPS's dual‑loop digital multiphase controller MP2882.

The MP2882 is a dual‑loop digital multiphase controller designed to power memory and system‑on‑chip (SoC) applications. It works with MPS Intelli‑Phase™ products to realize a multiphase voltage regulator (VR) solution with a minimum of external components. The MP2882 can be configured to run up to 16 phases on Rail 1 and up to 8 phases on Rail 2.

The MP2882 provides on‑chip non‑volatile memory (NVM) to store and restore device configurations. Device configuration and fault parameters can be easily configured or monitored via the PMBus/I²C interface. The MP2882 can also monitor and report output current (IOUT) through the CS output of Intelli‑Phase™ devices.

The MP2882 employs a unique digital multiphase control that delivers fast load transient response with minimal output capacitance. It uses a single power‑loop control method for both steady‑state and load transient conditions, and the power‑loop compensation configuration is very straightforward.

The MP2882 is offered in a TQFN‑56 (7x7mm) package.

Product Features and Benefits

• Multiphase, dual‑output digital controller

• PMBus/I²C interface (1MHz bus speed)

• AMD SVI2 compatible

• AVSBus compatible

• N+2 phase redundancy capability

• Pin‑configurable PMBus address

• Built‑in non‑volatile memory (NVM) for storing custom configurations

• Register‑configurable support for up to 16 rails

• 200kHz to 3MHz switching frequency (fSW) range

• Automatic loop compensation

• Fewer external components than traditional analog controllers

• Non‑linear digital control for excellent transient performance

• Flexible phase allocation across two rails

• Automatic phase shedding (APS) for improved overall efficiency

• Active current balancing between phases with configurable offset for thermal balance

• Input voltage (VIN), output voltage (VOUT), current and power monitoring

• Voltage regulator temperature monitoring

• VIN undervoltage lockout (UVLO) protection, output overvoltage protection (OVP) and undervoltage protection (UVP), overcurrent protection (OCP) and overtemperature protection (OTP), with selectable no‑action, latch‑off or hiccup modes

• Intelli‑Phase™ fault diagnostics

• NVM black‑box recording

• Digital load‑line regulation

• Available in TQFN‑56 (7x7mm) package

Internal Block Diagram

The AP8000 universal programmer independently developed by Acroview has become a benchmark professional programming solution in the industry. The device supports flexible and configurable one‑to‑one and one‑to‑eight configuration modes, and provides both online and offline operating modes. Dedicated programming solutions have been developed for memory chips such as eMMC and UFS, fully covering the bare‑chip offline programming and on‑board programming needs of MPS's full range of chips. The AP8000 adopts an innovative modular design with three core modules – mainframe, baseboard and adapter socket – endowing the device with outstanding compatibility and expandability. As a universal programming platform, it not only adapts to various programmable chips on the market, but also, with its stable and high‑efficiency performance, serves as the core component of Acroview's automated batch programming system IPS5800S, capable of handling large‑scale chip programming tasks efficiently to meet mass‑production requirements.

The AP8000 mainframe offers flexible connectivity, equipped with both USB and NET interfaces for easy networking of multiple programmers. Through networking, users can easily achieve synchronized control of multiple programmers and carry out parallel programming efficiently. In terms of safety, the mainframe incorporates intelligent safety protection circuits that monitor chip placement status and circuit connections in real time. Once abnormalities such as chip reverse insertion or short circuits are detected, the power‑cut protection mechanism is triggered immediately, safeguarding both the chip and the programmer. The mainframe is equipped with a high‑speed FPGA chip internally, greatly improving data transmission and processing efficiency to ensure smooth and efficient programming. To enhance user convenience, an SD card slot is provided on the back of the mainframe. Users only need to save the project file generated on the PC to an SD card and insert it into the slot, then select, load and execute programming operations via the physical buttons on the programmer, enabling standalone operation without a PC. This design not only reduces dependence on computer hardware configuration, but also simplifies the working environment setup process, significantly improving operational flexibility.

In terms of expandability and compatibility, the AP8000 adopts a modular combination of baseboard and adapter boards, effectively extending the mainframe's functionality. Currently, the device supports products from all major semiconductor manufacturers, covering well‑known brands such as SK hynix, Micron, SANDISK, ASR and Kingston. Its wide device support includes NAND, NOR, MCU, CPLD, FPGA, EMMC and more, and it is fully compatible with multiple industry‑standard file formats such as Intel Hex, Motorola S, Binary and POF, providing users with a one‑stop, full‑scenario chip programming solution.

Company Introduction

About MPS: MPS (Monolithic Power Systems) is a globally renowned high‑performance analog semiconductor company headquartered in San Jose, California, USA. Founded in 1997, the company has proprietary innovative process technologies and focuses on designing and defining high‑performance power management solutions as an analog and mixed‑signal semiconductor company. It currently has over 4,000 power management products developed independently, widely used in industrial, communications infrastructure, cloud computing, automotive, and consumer electronics applications.

About Acroview: Acroview is a national‑level "Little Giant" enterprise specializing in R&D, production and sales of semiconductor chip testing and programming equipment. The company is committed to empowering the entire industrial chain – including Fabless, IDM, OSAT, wafer fabs and end‑device manufacturers – through innovative semiconductor testing technologies and solutions. Acroview's pioneering fully automated burn‑in system ABI (Auto Burn‑In) greatly improves chip burn‑in efficiency and reduces per‑DUT test costs. The company also provides equipment and solutions for various stages including PSV, CP, FT, ABI, SLT and programming. By seamlessly integrating leading product technology, system‑level expertise, and a globally deployed R&D and sales service network, Acroview creates value for customers to gain a competitive edge in the market.