universal ic programmer kit|flash ic programmer|Automated Device Programmers-System General

Acroview, a leader in chip programming, has officially announced the further expansion of its compatible chip coverage with the release of a new programming software version. The company’s core product—the universal programming platform AP8000—has now achieved full adaptation for SinOne’s industrial-grade Flash microcontroller SC92F5311M16.

The SC92F5311M16 is an enhanced 8051-core industrial-grade Flash microcontroller, with an instruction system fully compatible with the traditional 8051 product series.

The SC92F5311M16 integrates 8K bytes of Flash ROM, 512 bytes of SRAM, 256 bytes of EEPROM, up to 22 general-purpose I/Os, 12 external interrupt pins (which can be divided into two groups via mapping, covering 22 I/O ports), three 16-bit timers, 22+1 channels of 12-bit high-precision ADC, 8 channels of 16-bit high-performance PWM, 2 channels of conventional PWM (two outputs from Timer2), an internal high-precision 32MHz oscillator with ±1% accuracy, a low-frequency 32K oscillator with 4% accuracy, one UART, one SSI communication port (selectable among UART/SPI/TWI), and a built-in LED driver supporting both normal drive mode and push-pull drive mode, as well as an OP/CMP combined analog operational amplifier module. To improve reliability and simplify customer circuits, the SC92F5311M16 also internally integrates a 4-level selectable LVR, and high-reliability circuits such as 1.024V/2.4V/2.048V reference voltages for ADC.

The SC92F5311M16 features excellent anti-interference performance, making it highly suitable for main control applications in various use scenarios, including smart home appliances, smart home, IoT, wireless communications, gaming consoles, and other industrial control and consumer applications.

Main Features

Operating Conditions

• Operating voltage: 2.4V ~ 5.5V

• Operating temperature: -40°C ~ 105°C

EMS

• ESD

-- HBM: JS-001-2023 Class 3A

-- CDM: ANSI/ESDA/JEDEC JS-002-2022 Class C3

• EFT

-- EN61000-4-4 Level 4

Package Types

• 8-pin: SOP8

• 16-pin: SOP16

• 20-pin: SOP20/TSSOP20/QFN20 (3x3)

• 24-pin: SSOP24/QFN24 (4x4)

Core: 4T 8051

• System clock up to 32MHz, minimum instruction cycle 125ns

Flash ROM

• 8K bytes Flash ROM

• 1000 write/erase cycles

EEPROM

• 256 bytes EEPROM

• 10,000 write/erase cycles

• When writing to EEPROM, the VDD voltage must be within 2.5V ~ 5.5V

SRAM

• 256 bytes of on-chip direct-access RAM

• Additional 256 bytes of on-chip indirect-access RAM

• PWM duty cycle setting RAM

• LED display RAM

• Port mapping RAM

Programming and Debugging

• 2-wire JTAG programming and debug interface: P1.2/tCK, P1.3/tDIO

• When programming the Flash ROM with a programmer, please be sure to select the 5V voltage setting

Built-in High-Frequency 32MHz Oscillator (HRC)

• When used as the system clock source, the system clock frequency fSYS can be set via the programmer to 32/16/8/2.66MHz

• Frequency error

-- Across (2.4V ~ 5.5V) and (-40°C ~ 85°C) application environment: within ±1%

-- Across (2.4V ~ 5.5V) and (-40°C ~ 105°C) application environment: within ±1.5%

Built-in Low-Frequency 32kHz Oscillator (LRC)

• Clock source for WDT

• Can be used as clock source for Base Timer and can wake up from STOP mode

• Frequency error: across (4.0V ~ 5.5V) and 25°C application environment, within ±4%

Low-Voltage Reset (LVR)

• Four reset voltage levels selectable: 4.3V, 3.7V, 2.9V, 2.3V

• Default value is the Code Option selected by the user during programming

Interrupts (INT)

• 11 interrupt sources: Timer0~2, INT0, INT1, ADC, PWM, UART0, SSI, Base Timer, and CMP

• External interrupts

-- 2 interrupt vectors, total 12 interrupt pins, all configurable for rising-edge, falling-edge, or both-edge interrupts

-- The 12 external interrupt pins can be divided into two groups via mapping, covering 22 I/O ports

• Two-level interrupt priority settable

Digital Peripherals

• Up to 22 bidirectional and independently controllable I/O pins, each with independently settable pull-up resistors

• The 8 ports LED0~LED7 share one 16-level constant current source, with 16 selectable drive levels

• The 8 ports LED0~LED7 have high sink current capability (130mA @ 0.8V)

• 11-bit WDT with selectable clock divider

• Three timers: Timer0, Timer1, and Timer2

• Timer2 is a multi-function timer, supporting:

-- Capture function via T2EX

-- Two channels of conventional PWM20 and PWM21 respectively

-- PWM21 can be mapped to any I/O port

-- T2EX can be mapped to any I/O port

• PWM0: 8 channels of 16-bit PWM

-- Configurable as independent mode or complementary mode

◆ In independent mode, 8 channels share the same period, with duty cycles individually settable

◆ In complementary mode, four complementary PWM waveforms with dead-time can be output simultaneously

-- Output waveform can be inverted, and can be set to center-aligned or edge-aligned mode

-- Supports PWM fault detection (FLT)

• 1 independent UART communication port UART

-- RXD0 and TXD0 can be independently mapped to any I/O port

• 1 UART/SPI/TWI selectable communication port SSI

-- The three signal lines of SSI can be independently mapped to any I/O port

• Built-in checksum calculation module

• Integrated 16×16-bit hardware multiplier/divider

LED Driver

• 8 LED drive pins: LED0~LED7

• All LED pins have source drive capability with 16-level control

• LED0~LED7 can provide high sink current of 130mA @ 0.8V

• IC system clock used as LED clock source

• After one frame of LED scanning, the corresponding flag AUIF is set to 1

• In automatic scanning, SEG output pulse width is the same as COM width

• LED dead time settable

• LED push-pull mode features:

-- LED0~LED7 support push-pull mode, capable of driving up to 7×8 pixels in total

-- Scan mode selectable from "7×8" down to "1×2" and "1×1", 8 options in total

-- The COM function on any LEDn pin can be masked during scanning, making the COM function invalid while retaining SEG function, which can improve LED array brightness

-- Common ports LED0/LED1/LED6/LED7, with selectable scan times of 0.5T, 1T, 1.5T, 2T

Analog Peripherals

• CMP/OP combined function

-- Configurable as either analog comparator or operational amplifier

-- Analog comparator (CMP)

◆ CMP has four selectable positive input signal sources

◆ CMP reference voltage selectable from external input or 15-level VDD divider

◆ CMP typical response time: 2μs

◆ CMP can wake up from STOP mode

-- Operational amplifier (OP)

◆ OP has one selectable non-inverting input and one inverting input

• 22+1 channels of 12-bit ADC

-- 22 external ADC channels

-- One internal channel for direct VDD measurement

-- Built-in 1.024V/2.4V/2.048V reference voltages

-- ADC reference voltage has 4 options: VDD and internal 1.024V/2.4V/2.048V

-- ADC conversion complete interrupt power-saving mode configurable

• IDLE Mode, wake-up by any interrupt

• STOP Mode, wake-up by INT0~1, BaseTimer, and CMP

Internal Block Diagram

The AP8000 universal programmer independently developed by Acroview has become a benchmark professional programming solution in the industry. This device supports flexible and adjustable 1-to-1 and 1-to-8 configuration modes, and provides both online and offline working modes. It has developed dedicated programming solutions for memory chips such as eMMC and UFS, and can fully cover the bare-chip offline programming and on-board programming needs of SinOne’s entire chip series. The AP8000 adopts an innovative modular design of three core modules—main unit, baseboard, and adapter socket—endowing the device with excellent compatibility and expandability. As a universal programming platform, it not only adapts to various programmable chips on the market but also serves as the core component of Acroview’s automated batch programming system IPS5800S with stable and efficient performance, capable of handling large-scale chip programming tasks and meeting mass production requirements.

The AP8000 main unit features flexible connectivity, equipped with both USB and NET interfaces, enabling convenient networking of multiple programmers. Through networking, users can easily achieve synchronized control of multiple programmers and efficiently carry out parallel programming operations. In terms of safety, the main unit incorporates an intelligent safety protection circuit that monitors chip placement and circuit connections in real time. Once abnormalities such as reverse insertion or short circuits are detected, it immediately triggers a power-off protection mechanism, safeguarding both the chip and the programmer. The main unit is equipped with a high-speed FPGA chip, significantly improving data transmission and processing efficiency to ensure smooth and efficient programming. For enhanced convenience, an SD card slot is provided on the rear panel. Users can save project files generated on a PC to an SD card, insert it into the slot, and then select, load, and execute programming operations via the physical buttons on the programmer, enabling standalone operation independent of a PC. This design not only reduces reliance on computer hardware but also simplifies the working environment setup, greatly improving operational flexibility.

In terms of expandability and compatibility, the AP8000 adopts a modular combination of baseboard and adapter board, effectively expanding the main unit’s functional boundaries. To date, the device supports products from all major semiconductor manufacturers, covering well-known brands such as SK hynix, Micron, SANDISK, ASR, and Kingston. It supports a wide range of device types, including NAND, NOR, MCU, CPLD, FPGA, EMMC, etc., and is fully compatible with multiple industry-standard file formats such as Intel Hex, Motorola S, Binary, and POF, providing users with a one-stop, full-scenario chip programming solution.

Company Introduction

About SinOne: SinOne (SinOne Microelectronics) was founded in 2011 and is an integrated circuit supplier that provides innovative and competitive MCU platforms for electronic product developers based on market demands. With core technologies, advanced design capabilities, and digital-analog integration expertise, the company offers high-anti-interference and high-reliability 8-bit and 32-bit microcontroller (MCU) products, all of which are independently developed and technologically leading.

About Acroview: Acroview (ACROVIEW) is a national-level "Little Giant" specialized and innovative enterprise engaged in the R&D, production, and sales of semiconductor chip testing and programming equipment. The company is committed to empowering the entire industrial chain—including Fabless, IDM, OSAT, wafer fabs, and terminal equipment manufacturers—through innovative semiconductor testing technologies and solutions. Acroview’s pioneering fully automatic aging test ABI (Auto Burn-In) system greatly improves customer chip aging test efficiency and reduces per-DUT test costs. The company also provides equipment products and solutions covering PSV, CP, FT, ABI, SLT, and programming stages. By seamlessly integrating its leading product technology, system-level expertise, and globally distributed R&D and sales service networks, Acroview creates value for customers to achieve competitive advantage in the market.