universal ic programmer kit|flash ic programmer|Automated Device Programmers-System General

Acroview, a leader in chip programming, has announced the further expansion of its compatible device portfolio alongside the release of a new programming software version. Its core product, the universal programming platform AP8000, has now been fully adapted to support the embedded motor driver chip NSUC1612-Q1QAKR from Novosense.

The NSUC1612-Q1QAKR is a dedicated processor chip integrating 4-channel/3-channel half-bridge drivers, designed for controlling low-power motors. It can drive brushed DC motors, brushless DC motors, stepper motors, and more, and is widely used in automotive applications. This chip complies with the AEC-Q100 standard and supports a maximum junction temperature of up to 150°C. It also integrates overvoltage protection, with LIN port withstand voltage ranging from -40V to 40V and BVDD pin voltage ranging from -0.3V to 40V. The chip core is based on the ARM instruction set Cortex-M3, which adopts a Harvard architecture with separate data and address buses, improving the efficiency of address and data signal transmission.

Features

• 32-bit ARM® Cortex®-M3

• 32 KB Flash, 2 KB SRAM, 2 KB EEPROM

• 15 KB ROM with integrated BootLoader, supporting OTA

• 32 MHz high-precision oscillator with PLL

• 35 KHz low-power and low-speed clock

• Operating voltage range: 5.5V ~ 28V

• 1-channel 12-bit high-precision ADC

• 2-channel 8-bit DAC and comparator

• Built-in back-EMF comparator (BEMFC)

• 1 SPI/SSI communication interface, supporting 3-wire/4-wire

• LIN PHY supporting LIN2.x and SAE-J2602

• 1 FlexCAN

• 1 window watchdog and 1 digital watchdog

• 4 half-bridge outputs, RMS drive capability 350mA

• 3 half-bridge outputs, RMS drive capability 1.4A

• 1 5V LDO output capable of supporting external loads

• Integrated two temperature sensors for thermal shutdown protection

• Sleep mode current consumption < 50μA over full temperature range

• AEC-Q100 Grade 1

• Package: QFN32 5mm×5mm, HTSSOP24

Applications

• Electronic water valves and electronic expansion valves

• Air conditioning outlet actuators

• Air conditioning damper actuators

• Seat ventilation

• Active grille shutters

• Automatic charging door actuators

• Intelligent actuators for stepper motors, brushed DC motors, brushless DC motors, etc.

Internal Block Diagram

The AP8000 universal programmer independently developed by Acroview has become a benchmark professional programming solution in the industry. The device supports flexible one-to-one and one-to-eight configuration modes, offers both online and offline operation, and features dedicated programming solutions for eMMC, UFS, and other memory chips. It fully covers the bare-chip offline programming and on-board programming needs for Novosense's entire series of chips. The AP8000 adopts an innovative modular design with three core modules – mainframe, baseboard, and adapter – giving the device excellent compatibility and scalability. As a universal programming platform, it not only adapts to various programmable chips on the market but also serves as a core component of Acroview's automated batch programming system IPS5800S with stable and efficient performance, capable of handling large-scale chip programming tasks to meet mass production requirements.

The AP8000 mainframe offers flexible connectivity, equipped with both USB and NET interfaces for convenient networking of multiple programmers. Through networking, users can easily achieve synchronized control of multiple programmers for efficient parallel programming operations. In terms of security, the mainframe incorporates intelligent safety protection circuits that monitor chip placement status and circuit connections in real time. Once abnormal conditions such as reverse insertion or short circuits are detected, it immediately triggers overcurrent protection to safeguard the chip and programmer. The mainframe is equipped with a high-speed FPGA chip, significantly improving data transmission and processing efficiency for a smooth and efficient programming process. For enhanced convenience, an SD card slot is provided on the rear panel. Users can save project files generated on a PC to an SD card, insert it into the slot, and then complete file selection, loading, and programming via the programmer's physical buttons, enabling standalone operation without a PC. This design not only reduces dependency on computer hardware but also simplifies the workspace setup, greatly improving operational flexibility.

In terms of expandability and compatibility, the AP8000 adopts a modular combination of baseboard and adapter boards, effectively extending the mainframe's capabilities. Currently, the device supports products from all major semiconductor manufacturers, covering well-known brands such as SK hynix, Micron, SANDISK, ASR, and Kingston. Its supported device types include NAND, NOR, MCU, CPLD, FPGA, EMMC, and more, and it is fully compatible with industry-standard file formats such as Intel Hex, Motorola S, Binary, and POF, providing users with a one-stop, full-scenario chip programming solution.

Company Introduction

About Novosense: Novosense was founded in 2013 and is a high-performance, high-reliability analog and mixed-signal semiconductor company. Novosense focuses on three major directions: sensors, signal chains, and power management, providing a rich portfolio of semiconductor products and solutions for automotive, industrial, information and communications, and consumer electronics.

About Acroview: Acroview is a national-level "Little Giant" specialized and innovative enterprise engaged in the R&D, production, and sales of semiconductor chip testing and programming equipment. The company is committed to empowering the entire industrial chain, including Fabless, IDM, OSAT, wafer fabs, and end-device manufacturers, through innovative semiconductor testing technologies and solutions. Acroview's pioneering fully automatic burn-in system ABI (Auto Burn-In) greatly improves customers' chip burn-in efficiency and reduces per-DUT testing costs. It also provides equipment and solutions across stages including PSV, CP, FT, ABI, SLT, and programming. By seamlessly integrating its leading product technologies, system-level expertise, and globally deployed R&D and sales service networks, Acroview creates value for customers to gain a competitive edge in the market.