universal ic programmer kit|flash ic programmer|Automated Device Programmers-System General

ACROVIEW, a leader in chip programming, has officially announced the further expansion of its compatible device coverage with the release of a new version of its programming software. The company's core product – the universal programming platform AP8000 – has now achieved full adaptation with XHSC's 32-bit microcontroller HC32M441KCTI.

The HC32M441KCTI is a high-performance 32-bit microcontroller (MCU) launched by XHSC, based on the ARM Cortex-M4 core, designed for industrial control, motor drive, and low-power applications.

Product Features

• ARMv7-M architecture 32-bit Cortex-M4 CPU, integrated with FPU, MPU, supports DSP with SIMD instructions, and CoreSight standard debug unit. Maximum operating frequency 200MHz, delivering 250 DMIPS or 680 Coremarks of computing performance.

• Embedded memory

-- Up to 256KB Flash memory

-- Up to 32KB single-cycle access high-speed SRAM

• Power, clock, reset management

-- System power (VCC): 1.8-3.6V

-- 7 independent clock sources: external main crystal oscillator (4-25MHz); external sub-crystal oscillator (32.768kHz); internal high-speed RC (16/20MHz); internal medium-speed RC (8MHz); internal low-speed RC (32kHz); PLL; internal WDT dedicated RC (10kHz)

-- 15 reset sources: including Power-On Reset (POR), Low-Voltage Detection Reset (PVD1R/PVD2R), port reset (NRST), etc. Each reset source has an independent flag bit.

• Low-power operation

-- Peripherals can be independently turned on or off

-- Three low-power modes: Sleep mode, Stop mode, Power down mode

• Peripheral operation support system significantly reduces CPU processing load

-- 12-channel dual-host DMAC

-- 4 Data Computing Units (DCU)

-- Supports peripheral event mutual triggering (AOS)

• High-performance analog

-- 3 independent 12-bit 2.5Msps ADC

-- 2 independent 12-bit DAC

-- 4 independent voltage comparators (CMP)

• Timer

-- 2 multi-function 16-bit PWM Timers (Timer6)

-- 3 16-bit motor PWM Timers (Timer4)

-- 1 32-bit general-purpose Timer (TimerA)

-- 4 16-bit general-purpose Timers (TimerA)

-- 2 16-bit basic Timers (Timer0)

-- Real-Time Clock Timer (RTC)

-- 2 WDTs, supporting internal dedicated clock

• Up to 52 GPIOs

-- Up to 47 5V-tolerant IOs

• Up to 11 communication interfaces

-- 6 USART

-- 3 SPI

-- 2 I2C, supporting SMBus protocol

• Package types: LQFP64/48

Functional Block Diagram

ACROVIEW's self-developed AP8000 universal programmer has become a benchmark professional programming solution in the industry. The device supports flexible and configurable one-to-one and one-to-eight programming modes, and provides both online and offline working modes. It has developed dedicated programming solutions for storage chips such as eMMC and UFS, and can fully cover the bare-chip offline programming and on-board programming needs of XHSC's entire series of chips. The AP8000 adopts an innovative modular design of three core modules – main unit, baseboard, and adapter socket – giving the device excellent compatibility and expandability. As a universal programming platform, it not only adapts to various programmable chips on the market but also, with its stable and efficient performance, serves as the core component of ACROVIEW's automated batch programmer IPS5800S, capable of efficiently handling large-scale chip programming tasks to meet mass production requirements.

The AP8000 main unit features flexible connectivity, equipped with both USB and NET interfaces, enabling convenient networking of multiple programmers. Through networking, users can easily achieve synchronized control of multiple programmers and efficiently carry out parallel programming operations. In terms of safety, the main unit incorporates an intelligent safety protection circuit that monitors chip placement status and circuit connections in real time. Once abnormalities such as chip reverse insertion or short circuits are detected, it immediately triggers a power-off protection mechanism, fully safeguarding the safe operation of both the chip and the programmer. The main unit is equipped with a high-speed FPGA chip, significantly improving data transmission and processing efficiency to ensure a smooth and efficient programming process. To enhance convenience, an SD card slot is provided on the back of the main unit. Users only need to save the project files generated on a PC to an SD card and insert it into the slot, then they can complete file selection, loading, and programming operations through the programmer's physical buttons, enabling standalone operation independent of a PC. This design not only reduces dependence on computer hardware configuration but also simplifies the working environment setup process, significantly improving operational flexibility.

In terms of expandability and compatibility, the AP8000 adopts a modular combination design of baseboard and adapter boards, effectively expanding the main unit's functional boundaries. Currently, the device supports products from all major semiconductor manufacturers, covering well-known brands such as SK hynix, Micron, SANDISK, ASR, and Kingston. Its supported device types are extensive, including NAND, NOR, MCU, CPLD, FPGA, EMMC, etc., and it is fully compatible with multiple industry-standard file formats such as Intel Hex, Motorola S, Binary, and POF, providing users with a one-stop, full-scenario chip programming solution.

Company Introduction

About XHSC: XHSC (Xiaohua Semiconductor) is a core subsidiary of Huada Semiconductor Co., Ltd., which is the integrated circuit business platform under China Electronics Corporation (CEC). XHSC was formerly the MCU business unit of Huada Semiconductor. XHSC focuses on home appliances, industrial, automotive, IoT, and other fields, specializing in the design of core intelligent control chips. It provides customers with four major product lines – general-purpose control, motor control, automotive electronics, and ultra-low power – as well as a complete set of system-level solutions including corresponding algorithms and software.

About ACROVIEW: ACROVIEW is a national-level "Little Giant" enterprise specialized in R&D, production, and sales of semiconductor chip testing and programming equipment. The company is committed to empowering the entire industry chain – including Fabless, IDM, OSAT, wafer fabs, and end-equipment manufacturers – through innovative semiconductor testing technologies and solutions. ACROVIEW's pioneering fully automatic Burn-In ABI (Auto Burn-In) system greatly improves customers' chip burn-in testing efficiency and reduces per-DUT testing costs. The company also provides equipment products and solutions across various stages including PSV, CP, FT, ABI, SLT, and programming. We seamlessly integrate our leading product technology advantages, system-level expertise, and globally distributed R&D and sales service networks to create value for customers in achieving market leadership.