universal ic programmer kit|flash ic programmer|Automated Device Programmers-System General

Acroview, the leader in chip programming, has officially announced the expansion of its compatible chip coverage with the release of its latest programming software. The company's core product, the universal programming platform AP8000, now fully supports Silan Microelectronics' 32-bit microcontroller SC32F57128LF1G.

The SC32F57128LF1G is a 32-bit microcontroller based on the Cortex-M0 core, with a maximum main frequency of 48MHz, supporting up to 128KB Flash, 8KB SRAM, and 1KB EEPROM. It integrates rich timers, communication interfaces (6 UARTs, 1 SPI, 1 SSP, and 1 I2C), and a high-performance 12-bit 500Ksps ADC. The SC32F57128LF1G is particularly suitable for next-generation white goods, office automation, IoT, and various other applications.

Product Features

• ARM 32-bit Cortex-M0
-- Maximum main frequency 48MHz
-- Nested Vectored Interrupt Controller (NVIC)
-- Supports single-cycle 32-bit × 32-bit multiplication
-- Supports 6-channel DMA controller

• Memory
-- Up to 128KB Flash
-- Erase/Write cycles: >20,000
-- Data retention: >10 years @85°C
-- Up to 8KB RAM with parity check
-- 1KB EEPROM
-- Data retention: >10 years @85°C
-- Erase/Write cycles: >1,000,000

• Development Support
-- Supports SWD debug (default 4-wire)
-- Supports ISP and IAP

• Power and Reset
-- Operating voltage: 2.0V ~ 5.5V
-- Built-in MVR, typical voltage 1.5V
-- Built-in Power-On Reset (POR), typical release voltage 1.8V
-- Built-in Low-Voltage Reset (LVR), 8-level reset voltage options: 1.9V, 2.1V, 2.3V, 2.7V, 3.0V, 3.7V, 4.0V, 4.3V
-- Built-in Low-Voltage Detection (LVD), 8-level detection voltage options: 2.4V, 2.7V, 3.0V, 3.3V, 3.6V, 3.9V, 4.2V, 4.5V

• Clock System
-- External high-frequency crystal: 1~16MHz
-- Built-in 32kHz low-speed RCL, used as independent clock source for watchdog
-- Built-in 16MHz high-accuracy RCH, ±1% @ 2.0~5.5V, -20~105°C
-- Built-in 128kHz high-accuracy HARCL, ±15% @ 2.0~5.5V, -40~105°C
-- Built-in PLL, up to 96MHz, divided by 2 to provide clock for CPU and other high-speed peripherals
-- Supports external high-frequency oscillator clock loss detection

• Input/Output
-- 7 groups of I/O ports, up to 52 I/O pins
-- Programmable pull-up, pull-down, open-drain output
-- Two selectable drive strengths
-- Supports Schmitt trigger input and TTL input
-- Supports input inversion
-- Supports port configuration lock
-- Each I/O can be used as external interrupt input, supporting edge and level triggering

• Timers
-- 8 16-bit general timers (GTA), each can run independently for timing and capture functions, generating independent interrupts and DMA requests; multiple channels can be combined for advanced timer functions such as one-shot pulse output, PWM output, and multi-PWM output
-- 2 16-bit basic timers BT160/161, compatible with traditional MCS51 functions - BT160 supports square wave output, BT161 supports PWM output
-- 1 WT counter (maximum count interrupt 256s)
-- 2 watchdogs (independent and window)
-- 1 system time timer SYSTICK: 24-bit self-decrementing counter

• Communication Interfaces
-- Up to 6 UARTs (0~5), baud rate up to 3Mbps - UART0 supports flow control, FIFO, and other complex functions
-- 1 SSP interface and 1 SPI interface: Master mode 24Mbit/s, Slave mode 6Mbit/s
-- 1 I2C, supports master/slave mode and three operating modes: Standard/Fast/Fast-mode Plus

• Analog Subsystem
-- 1 high-performance 12-bit ADC
-- Up to 14 external input channels, sampling rate 500Ksps
-- Built-in high reference options: 2/3/4V
-- Built-in 4 sets of high/low threshold digital comparators

• Security Mechanisms
-- Supports memory and peripheral protection
-- Supports CRC
-- 128-bit unique ID

• Operating Modes and Current
-- Normal mode: 6.7mA @ VDD=5V, MCLK=48MHz, analog modules and peripherals off
-- Sleep mode: 1.4mA @ VDD=5V, MCLK=16MHz, analog modules and peripherals off
-- Deep Sleep mode: 15µA @ VDD=5V, analog and digital modules off, core state retained, RAM data retained

• Operating Temperature
-- -40~105°C

• Package Types
-- LQFP-32/44/48/52/64
-- QFN-16

Applications
• White goods
• Office automation
• IoT modules

Internal Block Diagram

Acroview's self-developed AP8000 universal programmer has become a benchmark professional programming solution in the industry. The device supports flexible and adjustable 1-to-1 and 1-to-8 configuration modes, and provides both online and offline operation. With dedicated programming solutions developed for eMMC, UFS, and other memory chips, it fully covers bare-chip offline programming and on-board programming for the entire range of Silan Microelectronics chips. The AP8000 adopts an innovative modular design with three core modules: main unit, baseboard, and adapter, giving the device excellent compatibility and expandability. As a universal programming platform, it not only adapts to various programmable chips on the market but also, with its stable and efficient performance, serves as the core component of Acroview's automated batch programming system IPS5800S, capable of handling large-scale chip programming tasks to meet mass production requirements.

The AP8000 main unit offers flexible connection methods, equipped with both USB and NET interfaces, enabling convenient networking of multiple programmers. Through networking, users can easily achieve synchronous control of multiple programmers and efficiently carry out parallel programming operations. In terms of safety, the main unit features intelligent safety protection circuitry that monitors chip placement and circuit connection status in real time. Once anomalies such as reverse insertion or short circuits are detected, it immediately triggers power-off protection, fully safeguarding the safe operation of both chips and the programmer. The main unit is equipped with a high-speed FPGA chip, greatly improving data transmission and processing efficiency, ensuring a smooth and efficient programming process. To enhance user convenience, an SD card slot is provided on the back of the main unit. Users only need to save project files generated on a PC to an SD card and insert it into the slot, then use the programmer's physical buttons to select, load, and execute programming operations, enabling standalone operation independent of a PC. This design not only reduces dependence on computer hardware but also simplifies the working environment setup, significantly improving operational flexibility.

In terms of expandability and compatibility, the AP8000 adopts a modular combination of baseboard and adapter board, effectively extending the functionality of the main unit. Currently, the device supports products from all major semiconductor manufacturers, covering well-known brands such as SK hynix, Micron, SANDISK, ASR, Kingston, and others. The supported device types are extensive, including NAND, NOR, MCU, CPLD, FPGA, EMMC, etc., and it is fully compatible with various industry-standard file formats such as Intel Hex, Motorola S, Binary, and POF, providing users with a one-stop, full-scenario chip programming solution.

Company Introduction

About Silan Microelectronics: Founded in September 1997, Silan Microelectronics is a high-tech enterprise specializing in IC design and semiconductor microelectronics related product manufacturing. Silan has become one of China's largest integrated device manufacturers (IDM) for IC design and manufacturing. Silan's technology and products cover many fields of consumer products, maintaining a leading position in multiple technical areas, such as green power chip technology, MEMS sensor technology, LED lighting and display technology, high-voltage intelligent power module technology, third-generation power semiconductor device technology, and digital audio/video technology.

About Acroview: Acroview is a national-level "Little Giant" enterprise specialized in R&D, production, and sales of semiconductor chip testing and programming equipment. The company is committed to empowering the entire industrial chain, including Fabless, IDM, OSAT, wafer fabs, and end-equipment manufacturers, through innovative semiconductor testing technologies and solutions. Acroview's pioneering Auto Burn-In (ABI) system greatly improves chip burn-in testing efficiency and reduces per-DUT testing costs. Acroview also provides equipment products and solutions for various stages including PSV, CP, FT, ABI, SLT, and programming. The company perfectly integrates its leading product technology advantages, system-level expertise, and globally distributed R&D and sales service networks to create value for customers in gaining a competitive edge in the market.