universal ic programmer kit|flash ic programmer|Automated Device Programmers-System General

ACROVIEW, a leader in chip programming, has announced further expansion of its compatible device coverage with the release of its new programming software. Its core product, the universal programming platform AP8000, now fully supports Silan Microelectronics' 32-bit microcontroller SC32F57128LF1G.

The SC32F57128LF1G is a 32-bit microcontroller based on the Cortex-M0 core, with a maximum main frequency of 48MHz. It supports up to 128KB Flash, 8KB SRAM, and 1KB EEPROM. The device integrates rich timers, communication interfaces (6 UARTs, 1 SPI, 1 SSP, and 1 I2C), and a high-performance 12-bit 500Ksps ADC. The SC32F57128LF1G is particularly suitable for next-generation white goods, office automation, IoT, and various other applications.

Product Features

• ARM 32-bit Cortex-M0
-- Maximum main frequency 48MHz
-- Nested Vectored Interrupt Controller (NVIC)
-- Supports single-cycle 32-bit x 32-bit multiplication
-- Supports 6-channel DMA controller

• Memory
-- Up to 128KB Flash
-- Erase/write endurance: >20,000 cycles
-- Data retention: >10 years @85°C
-- Up to 8KB RAM with parity check
-- 1KB EEPROM
-- Data retention: >10 years @85°C
-- Erase/write endurance: >1,000,000 cycles

• Development Support
-- Supports SWD debug (default 4-wire)
-- Supports ISP and IAP

• Power and Reset
-- Operating voltage: 2.0V to 5.5V
-- Built-in MVR, typical voltage 1.5V
-- Built-in power-on reset, typical release voltage 1.8V
-- Built-in low-voltage reset, 8-level reset voltage options: 1.9V, 2.1V, 2.3V, 2.7V, 3.0V, 3.7V, 4.0V, 4.3V
-- Built-in low-voltage detection, 8-level detection voltage options: 2.4V, 2.7V, 3.0V, 3.3V, 3.6V, 3.9V, 4.2V, 4.5V

• Clock System
-- External high-frequency crystal: 1~16MHz
-- Built-in 32kHz low-speed RCL, used as independent clock source for watchdog
-- Built-in 16MHz high-precision RCH, ±1% @ 2.0~5.5V, -20~105°C
-- Built-in 128kHz high-precision HARCL, ±15% @ 2.0~5.5V, -40~105°C
-- Built-in PLL, up to 96MHz, divided by 2 to supply CPU and other high-speed peripherals
-- Supports external high-frequency oscillator clock loss detection

• Input/Output
-- 7 I/O groups, supporting up to 52 I/O ports
-- Programmable pull-up/pull-down, open-drain output
-- Two selectable drive strength levels
-- Supports Schmitt trigger and TTL input
-- Supports input inversion
-- Supports port configuration locking
-- Each I/O can be used as external interrupt input, supports edge and level triggering

• Timers
-- 8 16-bit general timers (GTA), each can run independently for timing and capture functions, generating independent interrupts and DMA requests; multiple channels can be linked for advanced timer functions such as one-shot pulse output, PWM output, and multi-PWM output
-- 2 16-bit basic timers BT160/161, compatible with traditional MCS51 functions - BT160 supports square wave output, BT161 supports PWM output
-- 1 WT counter (max count interrupt 256S)
-- 2 watchdog timers (independent and window)
-- 1 system time timer SYSTICK: 24-bit self-decrementing counter

• Communication Interfaces
-- Up to 6 UARTs (0~5), baud rate up to 3Mbps - UART0 supports flow control and FIFO, etc.
-- 1 SSP and 1 SPI: Master mode 24Mbit/s, Slave mode 6Mbit/s
-- 1 I2C, supports master/slave mode, and three operating modes: Standard/Fast/High-speed

• Analog Subsystem
-- 1 high-performance 12-bit ADC
-- Up to 14 external input channels, sampling rate 500Ksps
-- Built-in high reference voltage options: 2/3/4V
-- Built-in 4 sets of high/low threshold digital comparators

• Security Mechanisms
-- Supports memory and peripheral protection
-- Supports CRC
-- 128-bit unique ID

• Operating Modes and Current
-- Normal mode: 6.7mA @ VDD=5V, MCLK=48MHz, analog modules and peripherals off
-- Sleep mode: 1.4mA @ VDD=5V, MCLK=16MHz, analog modules and peripherals off
-- Deep Sleep mode: 15µA @ VDD=5V, analog and digital modules off, core state retained, RAM data retained

• Operating Temperature
-- -40 to 105°C

• Package Types
-- LQFP-32/44/48/52/64
-- QFN-16

Applications

• White goods
• Office automation
• IoT modules

Internal Block Diagram

The AP8000 universal programmer developed by ACROVIEW Technology has become a benchmark professional programming solution in the industry. The device supports flexible configurable 1-to-1 and 1-to-8 modes, and offers both online and offline operation. It features dedicated programming solutions for eMMC, UFS, and other memory chips, covering bare-chip offline programming and on-board programming for the entire range of Silan Microelectronics chips. The AP8000 adopts an innovative modular design with three core modules: main unit, baseboard, and adapter, giving the device excellent compatibility and expandability. As a universal programming platform, it not only adapts to various programmable chips on the market but also serves as a core component of ACROVIEW's automated batch programming system IPS5800S with stable and efficient performance, handling large-scale chip programming tasks to meet mass production requirements.

The AP8000 main unit features flexible connectivity with both USB and NET interfaces, enabling convenient networking of multiple programmers. Through networking, users can easily achieve synchronized control of multiple programmers for efficient parallel programming. In terms of safety, the main unit incorporates intelligent safety protection circuits that monitor chip placement and connection status in real time. Once anomalies such as reverse insertion or short circuits are detected, it immediately triggers power-off protection to safeguard both the chip and programmer. The main unit is equipped with a high-speed FPGA chip, greatly improving data transfer and processing efficiency for smooth and efficient programming. For enhanced convenience, the back of the main unit has an SD card slot. Users can store engineering files generated on a PC to an SD card, insert it into the slot, and then use the programmer's physical buttons to select, load, and execute programming operations independently of a PC. This design not only reduces dependency on computer hardware but also simplifies the working environment setup, significantly improving operational flexibility.

In terms of expandability and compatibility, the AP8000 uses a modular combination of baseboard and adapter boards, effectively expanding the main unit's functionality. Currently, the device supports products from all major semiconductor manufacturers, covering brands such as SK Hynix, Micron, Sandisk, ASR, Kingston, and more. It supports a wide range of device types including NAND, NOR, MCU, CPLD, FPGA, eMMC, etc., and is fully compatible with various industry standard file formats such as Intel Hex, Motorola S, Binary, and POF, providing users with a one-stop, full-scenario chip programming solution.

Company Introduction

About Silan Microelectronics: Silan Microelectronics was founded in September 1997 and is a high-tech enterprise specializing in IC design and semiconductor microelectronics product manufacturing. Silan has become one of the largest integrated circuit design and manufacturing (IDM) companies in China. Silan's technology and products cover many fields of consumer products, maintaining a leading position in multiple technical areas such as green power chip technology, MEMS sensor technology, LED lighting and display technology, high-voltage intelligent power module technology, third-generation power semiconductor device technology, and digital audio/video technology.

About ACROVIEW Technology: ACROVIEW Technology is a national-level "Little Giant" specialized and innovative enterprise engaged in the R&D, production, and sales of semiconductor chip testing and programming equipment. The company is committed to empowering the entire industry chain including Fabless, IDM, OSAT, wafer fabs, and end-device companies through innovative semiconductor testing technologies and solutions. ACROVIEW's pioneering Auto Burn-In (ABI) system greatly improves customer chip burn-in testing efficiency and reduces per-DUT test cost. The company also provides equipment and solutions for various stages including PSV, CP, FT, ABI, SLT, and programming. It perfectly integrates product technology leadership, system-level expertise, and a globally distributed R&D and sales service network to create value for customers to gain a competitive edge in the market.