universal ic programmer kit|flash ic programmer|Automated Device Programmers-System General

Acroview, a leader in chip programming, has announced further expansion of its compatible chip model coverage with the release of a new version of its programming software. The company's core product, the universal programming platform AP8000, has now been fully adapted to support Silan Microelectronics' high-performance microcontroller SC32F5432RE1.

The SC32F5432RE1 is a high-performance microcontroller designed specifically for motor controllers and digital power supplies. It features a Cortex-M0 core with a maximum operating frequency of 72MHz and an ADC sampling speed of 1Msps. It also includes a co-processor unit capable of various operations such as multiplication (including multiply-accumulate, multiply-subtract), division, shifting, and CRC.

The SC32F5432RE1 supports single-supply operation, integrates a high-precision high-speed oscillator (RCH) and low-speed oscillator (RCL), and offers multiple low-power operating modes. It also integrates multiple enhanced PWM channels, a high-precision high-speed ADC, multiple analog comparators, and high-speed operational amplifiers, making it suitable for various motor and power control applications while simplifying system cost.

Main Features

• ARM 32-bit Cortex-M0

-- Maximum 72MHz

-- Nested Vectored Interrupt Controller (NVIC)

-- Supports single-cycle 32-bit × 32-bit multiplication

-- Supports 3-channel DMA controller

-- Supports MAC, DIV, CRC functions

• On-chip Memory

-- 32K/64K bytes FLASH, data retention >10 years, 10,000 erase/write cycles

-- 6K/10K bytes RAM with parity check

• Development Support

-- Two-wire Serial Wire Debug (SWD)

• Power and Reset

-- Operating voltage: 2.7V ~ 5.5V

-- Built-in MVR, selectable normal and low-power modes

-- Built-in power-on reset module

-- Built-in low-voltage reset module, 8 selectable reset voltages: 1.9V, 2.1V, 2.3V, 2.7V, 3.0V, 3.7V, 4.0V, 4.3V

-- Built-in low-voltage detection module, 8 selectable detection voltages: 2.4V, 2.7V, 3.0V, 3.3V, 3.6V, 3.9V, 4.2V, 4.5V

• Serial Communication Interfaces

-- 2 UARTs

-- 1 SPI

• Analog Performance

-- 3 analog comparators (CMP0x, CMP1x, CMP2x) with selectable input hysteresis

-- 2 programmable operational amplifiers with adjustable offset and gain (OPA0, OPA1)

-- One single S/H-12bit ADC controller, up to 17 external input channels, maximum conversion rate 1Msps

• Operating Modes

-- Normal mode

-- Sleep mode

-- Deep Sleep mode

• Clock System

-- Built-in 32kHz/128kHz low-speed RCL

-- Built-in 48MHz/72MHz high-precision RCH

• Input/Output

-- Up to 30 I/O ports

-- Compatible with CMOS and TTL input levels

-- Programmable pull-up/pull-down, push-pull/open-drain output modes, digital input filtering, and input inversion

-- All can be used as external interrupt inputs, supporting edge and level triggering

• Timers

-- Two 16-bit timers, BT0 (including BT00 and BT01) and BT1 (including BT10 and BT11). Four operating modes: timer/counter mode, capture mode 1, capture mode 2, 8-bit timer mode; can be cascaded as a 32-bit timer

-- One 32-bit timer BT4, containing two independent timers

-- One 16-bit PWM advanced control timer with dead-time control and emergency brake, designed for motor control, with 3 PWM outputs

-- 2 watchdog timers

-- 1 system time timer, 24-bit auto-decrement counter

• Operating Temperature

-- -40 ~ 85ºC

• Package Types

-- LQFP-32

-- SSOP-24

-- QFN-32

Internal Block Diagram

The AP8000 universal programmer independently developed by Acroview has become a benchmark professional programming solution in the industry. The device supports flexible configurable modes: one-to-one and one-to-eight, and offers both online and offline operation. It has also developed dedicated programming solutions for memory chips such as eMMC and UFS, fully covering the bare-chip offline programming and on-board programming needs of all Silan Microelectronics series chips. The AP8000 adopts an innovative modular design with three core modules: main unit, base board, and adapter, giving the device excellent compatibility and expandability. As a universal programming platform, it not only adapts to various programmable chips on the market but also serves as a core component of Acroview's automated batch programmer IPS5800S with stable and efficient performance, efficiently handling large-scale chip programming tasks to meet mass production requirements.

The AP8000 main unit features flexible connectivity, equipped with both USB and NET interfaces, enabling convenient networking of multiple programmers. Through the networking function, users can easily achieve synchronized control of multiple programmers and efficiently carry out parallel programming operations. In terms of safety, the main unit incorporates intelligent safety protection circuits that monitor chip placement status and circuit connections in real time. Once abnormalities such as chip reverse insertion or short circuits are detected, the system immediately triggers power-off protection, comprehensively safeguarding the safe operation of chips and the programmer. The main unit is equipped with a high-speed FPGA chip, greatly improving data transmission and processing efficiency, ensuring a smooth and efficient programming process. To enhance ease of use, an SD card slot is provided on the back of the main unit. Users only need to save the project file generated on a PC to an SD card and insert it into the slot, then use the programmer's physical buttons to select, load, and execute programming operations, enabling standalone operation without a PC. This design not only reduces dependence on computer hardware configuration but also simplifies the working environment setup, significantly improving operational flexibility.

In terms of expandability and compatibility, the AP8000 adopts a modular combination design of base board and adapter board, effectively extending the main unit's functionality. Currently, the device supports products from all major semiconductor manufacturers, covering well-known brands such as SK Hynix, Micron, SANDISK, ASR, Kingston, etc. The supported device types are extensive, including NAND, NOR, MCU, CPLD, FPGA, EMMC, etc., and it is fully compatible with various industry-standard file formats such as Intel Hex, Motorola S, Binary, and POF, providing users with a one-stop, full-scenario chip programming solution.

Company Introduction

About Silan Microelectronics: Founded in September 1997, Silan Microelectronics is a high-tech enterprise specializing in IC chip design and production of semiconductor microelectronics related products. Silan Microelectronics has become one of the largest integrated circuit chip design and manufacturing (IDM) companies in China. Silan's technologies and products cover many fields of consumer products, maintaining a leading position in multiple technical areas in China, such as green power chip technology, MEMS sensor technology, LED lighting and display technology, high-voltage intelligent power module technology, third-generation power semiconductor device technology, and digital audio/video technology.

About Acroview: Acroview is a national-level "Little Giant" enterprise specialized in R&D, production, and sales of semiconductor chip testing and programming equipment. The company is committed to empowering the entire industry chain, including Fabless, IDM, OSAT, wafer fabs, and end-equipment manufacturers, through innovative semiconductor testing technologies and solutions. Acroview's pioneering Auto Burn-In (ABI) system greatly improves customer chip burn-in testing efficiency and reduces per-DUT testing cost. The company also provides equipment products and solutions for various stages including PSV, CP, FT, ABI, SLT, and programming. Acroview perfectly integrates its leading product technology, system-level expertise, and globally distributed R&D and sales service networks to create value for customers in gaining a competitive edge in the market.